1. General

2. Codes & Standards to be followed 
• Indian electricity rules • National electrical code of India (NEC)
• National building code of India (NBC)
• Applicable standards issued by Bureau of Indian standards (BIS)
• Institute of Electrical & Electronics Engineers (IEEE)
• Regulations of local fire authorities
• Requirements stipulated by Pollution control Board for Noise & Air
3. Electrical equipment’s and its application used in the installation
• Control devices
• Measuring devices
• Circuit protection devices
• Transformers • Diesel generators
• Capacitors
• Bus ducts, Bus-bars, Cables (HT/LT) & wires
• Motors & Pumps
• Luminaries – General & Emergency
• Isolators & socket outlets
• UPS/Inverter & Battery banks
• Earthing or Grounding
• Lightning arrestor
4. Means of electrical distribution for installation
• Panels (LT)/Switch Board/Motor control centers (MCC’s)/Final Distribution boards (DB’s)
• Cable trays, trunking or raceways, conduits & underground Pipes (Concrete/PVC)
5. Major electrical loads used in the installation
• Lighting load – Internal & external
• Utility power load • HVAC loads like FCU’s, Fans etc
• PHE & FF loads like Water transfer pumps, Booster pumps, Fire Fighting pumps, Jockey pumps etc • Lifts (Elevator) load
• Computer & data centre (Server) loads for office building
6. Electrical design calculations
• Load & maximum demand calculation
• Transformer sizing calculation
• DG sizing calculation
• Short circuit calculation
• Voltage drop calculation
• Capacitor sizing calculation
• Cable sizing calculation
• Earthing calculation
• Lightning calculation
• UPS/Inverter sizing calculation
• Battery sizing calculation
7. Various design stages & Sequence of electrical design procedure  Concept design stage
• Understanding the building plans, elevations & sections
• Gathering specific data from the utilities(Electricity board)
• Understanding clients specific requirements
• Preparation of basis of design which should include the cost estimate.
Schematic design stage
• Preparation of Load calculation to arrive maximum peak demand
• Sizing of all Equipments, cables, cable trays
• Electrical design calculations
• Preparation of single line schematic of electrical distribution system with metering options
• Preparation of lighting, small power, earthing & miscellaneous layouts
• Preparation of technical specification Detailed design stage
• Preparation of detail layouts including sectional details wherever required
• Coordination with other services like HVAC,PHE & FF layouts
• Preparation of bill of quantities(BOQ)
• Preparation of shop drawings based on the tender drawings issued by
Electrical consultants for installation.
• As built drawings shall be prepared and handed over to client’s representative
Eligibility
Any Graduation, Diploma